Hands down, the coolest and smartest way to control auxiliary lighting!
Product Description
Denali’s ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
More Features, More Feedback!
Denali’s patent-pending multicolor halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters, it displays the exact intensity of both of your lights so you’re never stuck guessing if your lights are on, or what intensity they’re set to.
Thanks to the electronically fused circuits, the halo switch can also display, and allow you to select, the fuse values for each circuit. And if a fuse trips, the LED halo will turn red providing real-time feedback and allow for resetting the fuse.
Last but not least, the switch halo doubles as a battery monitor with a low-voltage cutoff feature. Denali’s industry-first design will flash different colors on startup to display your battery health and automatically shut off your auxiliary lights if the battery voltage drops below 10.8 volts.
Key Features:
DialDim™ Harness Overview
The dedicated light outputs are labeled and color coded so adding one or two sets of lights to you vehicle couldn’t be any easier. Connect your main lights to the blue leads and your 2nd set of lights (typically fog or visibility lights) to the green leads.
Then simply connect the ring terminals to the vehicle battery and the white 12v input wire to a switched power source. To enable the high beam sync, turn signal flashing features, or horn flashing features simply connect the input wires to the corresponding circuit on the vehicle.
In addition the controller harness and switch, the kit includes (4x) five foot plug-&-play light extensions and a handlebar switch mount. Simply add the light pods and your ready to ride!
Modular Mounting, Universal Design
Denali engineered our DialDim Lighting Controller with all of your outdoor adventures in mind. Denali’s patent-pending dimmer switch is designed to be handlebar mounted or surface mounted in both the horizontal or vertical position. The space-saving design is ideal for ATVs, Side by Sides, Jeeps, and Trucks (in addition to motorcycles) by enabling independent control of two sets of lights from a single switch.
Intuitive Lighting Control
The DialDim™ Lighting Controller has an easy to operate and easy to read multifunction switch
Operating the Multifunction Switch
The switch functions are easy to remember, but Denali went ahead and printed it on the back of the controller housing anyway (just in case you forget)!
Light Set One: Single click ON –> Press & Hold OFF
Light Set Two: Double Click ON –> Press & Hold OFF
Switch Between Circuits: Double Click
Fuse Setting Mode: 7 second hold ENTER –> 2 Second Hold EXIT
Reading the Halo Display
Start Up Flash Sequence
Green Flash on Start Up: Battery voltage above 11.8v
Red Flash on Start Up: Battery voltage below 11.8v
Red Flash (4 LEDs) on Start Up: Battery voltage below 10.8v. Low voltage cutoff mode. The lights will not turn on if voltage is below 10.8v.
Lighting Control
Steady Blue: Light set one operation & status
Steady Green: Light set two operation and status
Fuse Status & Setting
Solid Red: Tripped fuse (on the circuit that turned red). Press and hold for 7 seconds to enter fuse setting mode.
Blue Flashing: Fuse setting mode (circuit one)
Green Flashing: Fuse setting mode (circuit tow)
Fuse Setting Mode
To enter fuse setting mode, press and hold for 7 seconds until the blue and green circuits begin flashing.
When the circuits are flashing you can dial up or down to select your desired fuse value.
The eight positions around the halo are repurposed in fuse setting mode to provide 8 fuse options.
Double click to switch between the blue and green circuit.
Press and hold for 2 seconds to exit the fuse setting mode.
Compatible with all Denali 2.0 lights.
Highlights
Feature rich lighting controller
Independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness
Controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
Displays the exact intensity of both of your lights
Can also display, and allow you to select, the fuse values for each circuit
Doubles up as a battery monitor with a low-voltage cutoff feature
Product Specifications
Two fully independent light circuits
Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
Eight electronic fuse values (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
Five feature input wires (ignition, high beam, horn, left turn, right turn)
20A max per circuit (30A max combined)
Operating Voltage: 12 VDC
What’s in the box?
DialDim™ Controller x 1
DialDim™ Controller Harness x 1
DialDim™ Multi-function Switch x 1
7/8″ Handlebar Switch Mount x 1
66″ Plug-&-Play Light Extensions x 4
Universal Input Trigger Wire Harness x 1
Mounting Instructions
WARRANTY
Biker's Pad is a trading platform for all goods sold both on the web platform and physical store. All warranties on products sold, are directly covered by the product manufacturer and their product specific warranty policy. If there is any reason for the customer to claim warranty, Biker's pad will help the customer communicate as well as claim warranty. However, warranty claim acceptance is the sole discretion of the manufacturer. Customer may have to bear the shipping cost for the warranty claim if not allowed by the manufacturer. Please read all terms and conditions laid down by the manufacturer carefully before making a purchase.
SHIPPING
Shipping is free for all orders above Rs4999 anywhere in India. For orders below the explained limit, shipping cost will be charged based on location zones determined by Biker's Pad. There could be a shipping surcharge added for heavy and large products.
All orders received before 1 pm are usually shipped the same day. For all orders received post 1 pm, shipping is usually carried out the next day. We use multiple delivery partners depending on location and type of product to optimise product delivery to you.
In most instances, depending on location, we offer customers a choice of Regular Shipping and Express Shipping with timelines and cost mentioned for both the types. Product delivery is usually completed within the timelines notified, unless the delivery location is not widely serviced by national courier agencies or due to some unforeseen reason/ natural calamity. Customers should consider the provided delivery timelines after accounting for the order processing time.
RETURNS POLICY
Biker's Pad allows a 7-day conditional returns policy. The Customer will have to inform Biker's Pad support team on support@bikerspad.com or on our official whatsapp channel (Mob no 7738835000) explaining the reason. Returns are approved only if the product received by the customer is found to be damaged during transit, has a manufacturing defective or a wrong product was received. Customer is required to explain the issue along with images to prove their reason for returns. In case a return is approved, shipping charges to Biker's Pad warehouse will be re-imbursed. Refunds, if any related to product returns and shipping reimbursement will only be in the form of Store Credit which can be used for alternate purchase on Biker's Pad platform.
Whatsapp us!